Price: $9.95

O ring for idle mixture screw DHLA / DRLA / DHLB / FZD / PHBG / PHBD / PHBE / PHBL / PHPH / PHB / PHF / PHM

Price: $1.55

Washer for idle mixture screw DHLA / DRLA / DHLB / FZD / PHBG / PHBD / PHBE / PHBL / PHPH / PHB / PHF / PHM

Price: $11.55

Spring for idle mixture screw 4670 DHLA / DRLA / DHLB / FZD / PHBG / PHBD / PHBE / PHBL / PHPH / PHB / PHF / PHM

Laverda nr. 50120994

Free length 15.0mm

Diameter 7.4mm

Price: $3.20

O/D 10mm

I/D 6mm

Thickness 1mm

All sizes are approximate

Price: $2.55

O/D 18.20mm

I/D 14.5mm

Thickness 1mm

All sizes are approximate

Price: $2.55

Each gasket set contains all the gaskets and O rings required for one carburettor.

For standard variants of the carburettor – suffix A, B, C, G, S, V & Z

Price: $18.14

Each gasket set contains all the gaskets and O rings required for one carburettor.

( Note:- The Pump Diaphragm is not included)

There are 4 versions of the gasket set:-

• p/n 52520 ..

  Price: $34.50

  ]]>

  Each gasket set contains all the gaskets and O rings required for one carburettor.

  ( Note:- The Pump Diaphragm is not included)

  There are 4 versions of the gasket set:-

  • p/n 52520 ..

    Price: $34.50

    ]]> Each gasket set contains all the gaskets and O rings required for one carburettor.

    ( Note:- The Pump Diaphragm is not included)

    There are 4 versions of the gasket set:-

    • p/n 52520 ..]]> https://damclassicracing.com.au/fuel-tap-seal-3-hole-19mm-2-set/ Wed, 22 Feb 2023 14:07:39 +0000 https://damclassicracing.com.au/fuel-tap-seal-3-hole-19mm-2-set/

      This is a moulded seal using a hard Viton compound.

      Note: Spring loaded tap designs (i.e. all Laverda/Ducati) will leak if any pressure is put on the lever other than to rotate it. To avoid damage to the seal it is recommended to only rotate the lever when there is th..

      Price: $30.00

      ]]>

      This is a moulded seal using a hard Viton compound.

      Note: Spring loaded tap designs (i.e. all Laverda/Ducati) will leak if any pressure is put on the lever other than to rotate it. To avoid damage to the seal it is recommended to only rotate the lever when there is th..

      Price: $30.00

      ]]> This is a moulded seal using a hard Viton compound.

      Note: Spring loaded tap designs (i.e. all Laverda/Ducati) will leak if any pressure is put on the lever other than to rotate it. To avoid damage to the seal it is recommended to only rotate the lever when there is th..]]> https://damclassicracing.com.au/52544-gasket-kit-for-dellorto-carburettor-phm-h-l-m-p-r-t-s-and-z/ Mon, 15 Nov 2021 15:06:45 +0000 https://damclassicracing.com.au/52544-gasket-kit-for-dellorto-carburettor-phm-h-l-m-p-r-t-s-and-z/

      Each gasket set contains all the gaskets and O rings required for one carburettor.

      (Note:- The pump diaphragm is not included)

      There are 4 versions of the gasket set:-

      p/n 52520 – standard carburettor, suffix A, B, N& V

      p/n 52544 – For carburettor..

      Price: $21.95

      ]]>

      Each gasket set contains all the gaskets and O rings required for one carburettor.

      (Note:- The pump diaphragm is not included)

      There are 4 versions of the gasket set:-

      p/n 52520 – standard carburettor, suffix A, B, N& V

      p/n 52544 – For carburettor..

      Price: $21.95

      ]]> Each gasket set contains all the gaskets and O rings required for one carburettor.

      (Note:- The pump diaphragm is not included)

      There are 4 versions of the gasket set:-

      p/n 52520 – standard carburettor, suffix A, B, N& V

      p/n 52544 – For carburettor..]]>