DAM Classic Racing: New Products - Fuel - MIKUNI Parts

MIKUNI RS34-D21-K CARBURETTOR KIT for KAWASAKI Z900 / Z1000 / GPZ1100

Thu, 26 Feb 2026 08:21:03 +0000

RS34-D21-K CARBURETOR KIT:

- MIKUNI RS34 flat slide carburetor (Basic jetting for velocity stacks or K&N individual filters)

- Choke control directly on the carburetor

- Fits original intake boots - (40mm inner diameter)

- Main jet assortment (For fine-tuning)Price: $1,700.00

Mikuni RS36 Carburettor Set - Laverda 3 Cylinder [confirm price when ordering&91;

Wed, 11 Jun 2025 13:02:29 +0000

The Mikuni RS Series Carburettors were designed and built in response to the needs of the world’s top motorcycle road race and drag race teams. They required carburettors which would satisfy the precise fuel metering demands and high flow volume required by highly modified race engines. A..

Price: $1,600.00

Air Filter Pod 54mm DNA SHORT 50mm [OV-5400-SHORT&91; (Sold individually)

Mon, 17 Mar 2025 10:15:20 +0000

OVI-5404-SHORT

Air Filter Pod Suits Mikuni with 54mm OD inlet. This includes the Mikuni Conversions on Laverda 3 Cylinder models 1000, 1200, RGS variants

A high quality, multilayer cotton gauze, flameproof, oil impregnated air filter.

Price: $57.26

Jet Drill Kit 20PCS #61-#80 (0.34mm - 0.99mm) incl. Drill Pin Vice

Thu, 13 Feb 2025 20:56:02 +0000

20 x Carburettor Jet Drills and 1 x Pin Vice in a rigid plastic dispensing case.

Useful for cleaning carburettor jets and other small vents such as found in brake master cylinders.

Useful for tuning fuel mixture by drilling jets to establish the range of manufacturers jet sizes ..

Price: $19.24

Fuel Tap Washer 10.4x14.8x2 (2/SET) Dellorto type

Thu, 21 Dec 2023 17:30:59 +0000

Special Nylon Plastic Washer for M16 Fuel Taps.

Suits Orlandi/Cube type and other taps with M16 thread size. e.g. OMG, Paoli, Plastic Lever type, Metal Lever type.

10.8mm ID
14.8mm OD
2.00mm Thickness

Price: $11.88

In-line Fuel Filter Clear 50x6mm 158-FF6

Mon, 24 Aug 2020 11:19:16 +0000

In-line Fuel Filter with 6mm OD barbs, clear plastic body and bronze metal filter.

Price: $6.36

RS Rebuild Kit Mikuni RS 34, 36, 38, 40 (4/SET) MK-RS34-40

Wed, 17 Jun 2020 23:30:08 +0000

MK-RS34-40

Mikuni MK-RS34-40 Carburetor Rebuild Kit for Mikuni RS34 / RS36 / RS38 / RS4 Racing 4-Carburetor Assemblies.
This Mikuni rebuild kit is designed to replace multiple internal items including the float valves, internal gaskets, and clips as well as new external items such ..

Price: $200.00

Intake Manifold Flange Mikuni 60mm bolt centres & Spigot Ø40mm I-VM34-200-1

Tue, 25 Jun 2019 10:52:32 +0000

This Mikuni Rubber Mounting Flange is for use on carbs with a 40mm spigot outside diameter at the motor end, and a nominal 60mm distance between the two mounting bolt centres suits Laverda 750 models (8.5mm diameter stud holes elongated to suit Laverda 3 cylinder 62mm stud distance). The flange..

Price: $30.00

KV/10 O-ring for Mikuni Needle & Seats

Tue, 25 Jun 2019 10:18:15 +0000

This O-Ring suits Mikuni Needle & Seat Float Valves

Price: $3.00

N149.040 Mikuni Needle & Seat Float Valve Assy - Metal Tip (KV/10 O-ring not included)

Tue, 25 Jun 2019 09:50:01 +0000

Feed Hole Size
2.0, 2.5, 2.8
This size is an actual measurement in millimetres of the diameter of the float valve hole and usually is stamped on the end of the seat. If converting from gravity feed fuel to pumped, down sizing this hole size eliminates the risk of seat p..

Price: $30.00