A premium shock absorber set Nitron R1 Length 345-355mm.The spring diameter and length of the lower eye was an important design consideration of Nitron Shocks to allow clearance of the Chain Guard on Laverda.

All Nitron shocks can be adjusted + 10mm longer than standard. This gives marginally quicker steering and a little more ground clearance.

Please check chain tension throughout the suspension range to set correct tension.

Manufactured by Nitron to DAM Classic Racing supplied specifications. These are premium suspension units specifically designed for Laverda motorcycle geometry and similar bikes.

-Sports/Touring road-riding or Racing (Australia Period 4 compliant)

-Internal Reservoir Floating Piston

-Fully Hard Anodized Alloy Body

-Spherical Bearing Eyes with Alloy Inserts

-Combined 2-way adjustment

-Combined 24 clicks of Rebound & Compression Adjustment

-Nitrogen Gas Charged

-35mm Piston Design

-14mm Piston Rod

-Length Adjustable by screw thread

-Preload Adjustable by screw thread

Being of a floating piston design they can be mounted either with the body part at the top to reduce unsprung weight, or with the oil filled body section in the lower position to reflect a traditional 1970‘s look.

Nitron shocks to suit any twin shock motorcycle can be made individually to order at no extra cost. Please CONTACT US. Product photos shown are representative for trim combinations, and the specific eye or clevis mounts and length for your bike may not be shown.