PHB parts

06288 Dellorto Needle Valve Fibre Washer

Dell'orto 06288. Needle Valve Fibre Washer for Dellorto DRLA, PHB, PHBE, PHBH, PHBL, PHF, PHM, VHB, VHBZ, VHBT, VHSA, VHSB, VHSC, VHSB 34 Rotax Max, VHSH, VHST carburettors

10375 Dellorto Needle and Seat Float Valve Assy 150-225 PHBE PHB PHBH PHBL PHF PHM PHSB VHSA VHSB VHSC VHSH VHST

103071 Geniune Dell’orto needle valve with viton tip. Size#200 Float needle valve and seat to suit motorcycle and DRLA applications. Beware of cheap imitations – Look for the Dell’orto Diamond...

1104 Dellorto Cable Adjuster (30490198) ME, PHBD, PHBG, PHBH, PHBL, PHBN / PHVA, PHF, PHM, PHSB, SH1 / 2, SHA 10-12, SHA 14-15-16, SS1 & SS2, UB / MB, VHB / VHBZ / VHBT Parts, VHSA / VHSB / VHSC

Del 1104 Suits Dellorto Carburettors: ME, PHBD, PHBG, PHBH, PHBL, PHBN/PHVA, PHF, PHM, PHSB, SH1/2, SHA 10-12, SHA 14-15-16, SS1 & SS2, UB/MB, VHB/VHBZ/VHBT, VHSA/VHSB/VHSC Dell’orto Cable...

11715 Dellorto Manifold sleeve – ID 42mm, OD 45.9mm, L 19mm PHBE / PHB / PHBH / PHBL / PHF(M type only)

Used on PHBE / PHB / PHBH / PHBL / PHFM type carburettors only Inside diameter  42mm Outside diameter 45.9mm Width 19mm

11761 Dellorto Internal slide spring – LARGE (PHB/PHBE/PHM)

Slide spring for Dell’orto PHM carburettors that use top 12536 and don’t have a accelerator pump system. PHM  xx HS, HD, SD, ZS & ZD variants. Free length 195mm Diameter 30mm Wire thickness 1.3mm

12530 Dellorto Idle Emulsion Tube PHBH / PHBL

Not used on all variations of the carburettor.

12995 Dellorto Idle jet – deep PHBH PHBL, VHSA / VHSB / VHSC, VHSB 34 ROTAX MAX, VHSH

These are all genuine DellOrto jets flow tested at the factory. It is important to note that Dellorto measures its jets by flow rate rather than size. This means you cannot use a gauge to measure...

13086 Dellorto B Type Idle emulsion tube PHBH PHBL VHSA / VHSB / VHSC, VHSB 34 ROTAX MAX, VHSH

These are all genuine DellOrto jets flow tested at the factory. Beware of cheaper jets without the “INC” diamond logo which may not be the correct size Not used on all variations of carburettors.

14050 Rubber Cable Cap 49mm (58100115.1)

1476 Rubber Cable Cap 28mm

1486 Dellorto Idle (Pilot)/Main Jet 5mm PHBE PHB PHBH PHBG PHBL PHF PHM PHBR PHSB VHB VHBT VHBZ VHSA VHSB VHSC

These are all genuine DellOrto jets flow tested at the factory. It is important to note that Dellorto measures its jets by flow rate rather than size. This means you cannot use a gauge to measure...

1488 Dellorto Idle (Pilot) Jet 5mm, body Ø4mm PHBD, PHBG, UA/MA, UB/MB

Dell'orto 01488 Idle Jet for PHBD, PHBG, MA, MB, UA, UB carburettors 4mm body with 5mm thread Thread size M5 x 0.8mm Body Ø4mm These are all genuine DellOrto jets flow tested at the factory. It is...

2139 Dellorto Banjo Bolt Fibre Washer (ID 14.5mm) FHC/FHCD, FRPA, PHBE/PHB, PHBN/PHVA, PHF, PHM, SI, VHB/VHBZ/VHBT.

O/D 18.20mm I/D 14.5mm Thickness 1mm All sizes are approximate

3133 Dellorto Choke Return Spring PHBE / PHB / PHBG / PHBH / PHBL / PHM / PHSB / VHSA

Dellorto Part nr. Del 0313300 Choke Return Spring for individual carburettor without the use of a cable.  

3238 Dellorto Starting Valve Choke Piston PHB/PHBE/PHBH/PHBL/PHF/PHM/PHSB/SH1/SH2/VHB/VHBZ/VHBT/VHSA/VHSB,/VHSC

3238 Dell'orto 0323800 Choke Valve for carbu

4052 Dellorto Banjo Bolt Fibre Washer (ID 6mm) FHC/FHCD, FRPA, PHBE/PHB, PHBN/PHVA, PHF, PHM, SI, VHB/VHBZ/VHBT.

O/D 10mm I/D 6mm Thickness 1mm All sizes are approximate

4559 Dellorto Needle Valve PHBE / PHB / PHBH / PHBL / PHF / PHM / VHSA / VHSB / VHSC

( 8145 ) 4559 Geniune Dell’orto needle valve with viton tip. Replaces original part number 8145 in Dellorto needle valve and seat 9436 4 sided, measures 3.6mm across 17.3mm total length. Suits...

4568 Dellorto Banjo Bolt ( 30422173 ) PHBE / PHB / PHBH / PHBL / PHF / PHM / SHB / SHBC

A genuine Dellorto short fuel banjo bolt. For use with 8mm pipe fitting banjos only. Dimensions: 21mm total length 10mm spanner size M6 thread x 1mm pitch 9mm threaded length 8mm unthreaded...

4670 Dellorto Spring for Idle Mixture Screw PHBG / PHBD / PHBE / PHBL / PHPH / PHB / PHF / PHM

Spring for idle mixture screw 4670 DHLA / DRLA / DHLB / FZD / PHBG / PHBD / PHBE / PHBL / PHPH / PHB / PHF / PHM Laverda nr. 50120994 Free length 15.0mm Diameter 7.4mm

52519.77 Gasket kit for Dellorto Carburettor PHBE / PHB A,B,C,G,S,V,Z

Each gasket set contains all the gaskets and O rings required for one carburettor. For standard variants of the carburettor – suffix A, B, C, G, S, V & Z