DELLORTO

10375 Dellorto Needle and Seat Float Valve Assy 150-225 PHBE PHB PHBH PHBL PHF PHM PHSB VHSA VHSB VHSC VHSH VHST

103071 Geniune Dell’orto needle valve with viton tip. Size#200 Float needle valve and seat to suit motorcycle and DRLA applications. Beware of cheap imitations – Look for the Dell’orto Diamond...

10428 Dellorto Anti surge washer

Type a description for this product here...

11003 Dellorto Internal Rod for Carb Slide PHF {NO LONGER AVAILABLE}

Del 11003 A Solid Rod racing replacement for the 62500089 Cable in Dellorto PHF Carburettors. Length is 73mm. This part is listed in the RGA, RGS, Corsa Parts Book and the

1121 Dellorto Atomiser SS1

1126 Dellorto Main Jet SS1 & SS2

Diameter of thread M6 x 1.0 Hexagonal body 8mm A/F Total length 23.54mm Length of hexagonal body 15mm approx.

11715 Dellorto Manifold sleeve – ID 42mm, OD 45.9mm, L 19mm PHBE / PHB / PHBH / PHBL / PHF(M type only)

Used on PHBE / PHB / PHBH / PHBL / PHFM type carburettors only Inside diameter  42mm Outside diameter 45.9mm Width 19mm

11761 Dellorto Internal slide spring – LARGE (PHB/PHBE/PHM)

Slide spring for Dell’orto PHM carburettors that use top 12536 and don’t have a accelerator pump system. PHM  xx HS, HD, SD, ZS & ZD variants. Free length 195mm Diameter 30mm Wire thickness 1.3mm

11815 Dellorto PHM Slide – current type

11815 Dellorto PHM Slide – early type (machining required)

11819 Dellorto SI 20 Carburettor Top

Needle valve housing 4.5mm diameter. Also available as a Complete Assembly 12325

12325 Dellorto SI Carburettor Top

Needle valve housing 4.5mm diameter. Supplied as an assembly with: Top cover casting Fuel chamber cover with seal Fuel filter Cover screw

12530 Dellorto Idle Emulsion Tube PHBH / PHBL

Not used on all variations of the carburettor.