DELLORTO

1488 Dellorto Idle (Pilot) Jet 5mm, body Ø4mm PHBD, PHBG, UA/MA, UB/MB

Dell'orto 01488 Idle Jet for PHBD, PHBG, MA, MB, UA, UB carburettors 4mm body with 5mm thread Thread size M5 x 0.8mm Body Ø4mm These are all genuine DellOrto jets flow tested at the factory. It is...

1900 Dellorto P1 needle for SS1 SSI 35 carbs (Petrol)

Needle to suit Dell’orto SS1 35mm carburettors (petrol) This is for use with petrol, for methanol use the P2 needle

1949.300 Dellorto Float Chamber Needle Valve SS1 SSI 35 carbs

2468 Dellorto SS1 38 – 42mmMain jet holder (Discontinued)

Discontinued item shown for reference only Total length 39.1mm Thread diameter at hex end 17.9mm Thread diameter at round end 17.8m Hexagon 12mm A/F.

2470 Dellorto S type needle SS1

Needles to suit Dell’orto SS1 36, 38, 40 & 42mm carburettors.     Diameter of (mm) &n

2929 Dellorto SS1 36/38/40/42 Top Ring 2929

Internal diameter of thread 53.4mm Outside diameter 59.6mm

2930 Dellorto SS1 36/38/40/42 Top Cover (Discontinued)

Discontinued item shown for reference only Diameter of main body 48mm

3063 Dellorto SS1 36/38/40/42 Top Ring Clip (Discontinued)

Discontinued item shown for reference only  

3318 Dellorto Top Cover Screw VHB/ SHB

Alternative to part number 3978

4339 Dellorto P2 needle for SS1 SSI 35 carbs (Methanol)

Needle to suit Dell’orto SS1 35mm carburettors (Methanol) This is for use with methanol, for petrol use the P1 needle

4559 Dellorto Needle Valve PHBE / PHB / PHBH / PHBL / PHF / PHM / VHSA / VHSB / VHSC

( 8145 ) 4559 Geniune Dell’orto needle valve with viton tip. Replaces original part number 8145 in Dellorto needle valve and seat 9436 4 sided, measures 3.6mm across 17.3mm total length. Suits...

4568 Dellorto Banjo Bolt ( 30422173 ) PHBE / PHB / PHBH / PHBL / PHF / PHM / SHB / SHBC

A genuine Dellorto short fuel banjo bolt. For use with 8mm pipe fitting banjos only. Dimensions: 21mm total length 10mm spanner size M6 thread x 1mm pitch 9mm threaded length 8mm unthreaded...