Regina Duplex Chain 3/8x1/4 76 Links for Laverda 750, 1000 and 1200 models fitted with 2 or 3 row sprockets

When fitting this chain it is advisable to check the Clutch Cush Drive Rubbers at the same time, there should be no movement between the large sprocket and the clutch drum

Most late models have M6 hex bolts installed to fix the cush drive cover plate to the clutch drum. Earlier models used 5mm diameter rivets

Remove these rivets to replace the cush drive rubbers. Grind off the tops of the rivets, use a 3mm or 4mm drill to drill out the full length of the rivet, then using a 5mm punch gently tap them out. Take great care not to use excessive force that damages the alloy casting. Use an M6x1 Thread Tap to cut a thread in the alloy to accept M6x20 Hex Bolts and Spring Washers that replace the rivets. it is recomended for this procedure to be carried out by qualified persons using appropriate engineering equipment.

Other Parts you may consider necessary to complete the Primary Chain replacement may be a Lock Tab Washer for the Primary Sprocket and a Primary Cover Gasket for your model