Fuel Tank

Fuel Tap Paoli RHS M16x1

Paoli fuel tap with black plastic lever

Fuel Tap plastic lever LHS M16x1

This is an OMG replica of the Paoli fuel tap.This Left-side tap OFF position points to the rear NOTE: If purchasing as a set, the 52101999.2 Right-side tap OFF position points to the front

Fuel Tap plastic lever RHS M16x1

This is an OMG replica of the Paoli fuel tap. NOTE: If purchasing as a set, the right-side tap OFF position points forward. The left-side tap OFF position points to the rear.

Fuel Tap Seal 3 hole 14mm (2/SET)

This is a moulded seal using a hard Viton compound. Note: Spring loaded tap designs (i.e. all Laverda/Ducati) will leak if any pressure is put on the lever other than to rotate it. To avoid damage...

Fuel Tap Seal 3 hole 17mm (2/SET)

Suits Orlandi 'cube type' petrol taps fitted to early model Laverda/Ducati/Moto Guzzi/MotoMorini. This is a moulded seal using a hard Viton compound.

Fuel Tap Seal 3 hole 19mm (2/SET)

This is a moulded seal using a hard Viton compound. Note: Spring loaded tap designs (i.e. all Laverda/Ducati) will leak if any pressure is put on the lever other than to rotate it. To avoid damage...

Fuel Tap Seal 3 hole 21mm (2/SET)

This is a moulded seal using a hard Viton compound. Note: Spring loaded tap designs (i.e. all Laverda/Ducati) will leak if any pressure is put on the lever other th

Fuel Tap Seal 4 hole 21mm (2/SET)

This is a moulded seal using a hard Viton compound. Note: Spring loaded tap designs (i.e. all Laverda/Ducati) will leak if any pressure is put on the lever other th

Fuel Tap Washer 10.4x14.8x2 (2/SET) Dellorto type

Special Nylon Plastic Washer for M16 Fuel Taps. Suits Orlandi/Cube type and other taps with M16 thread size. e.g. OMG, Paoli, Plastic Lever type, Metal Lever type. 10.8mm ID 14.8mm OD  2...

Hose Joiner Brass 5/16(7.9mm)

P703 5/16" Joiner Brass Useful for joining 6-8mm fuel hoses. Note: most common Laverda fuel hose has an internal diameter of 7mm

Hose Joiner Brass T Piece 5/16(7.94mm)

P1404 7/16" Three-Way 'T' Brass Useful for joining three 6-8mm fuel hoses, such as splitting a single fuel feed hose into two hoses. Note: most common Laverda fuel hose has an internal diameter of...

Laverda Fuel Pump Kit - Filter & Housing 650/668/750S

LV019001000080 / LV019003000169 Magneti Marelli Walbro Fuel Pump Kit including the rubber support, filter & housing

Laverda Fuel Pump Walbro

LV077003000005 / LV019001000080 / 019003000169 Walbro Fuel Pump for L

Laverda Rack for Fuel Tank 750GT

Chrome Carry-Rack for Laverda 750 GT Fuel Tank.

LV002006V00841 Plastic Breather Tube 1 metre

CR592 Clear Plastic Tube for Breather Relief Valve on Laverda 650, 668 & 750S models. General purpose hose that is both food grade and petrol/oil resistant. Complies to Australian Standards.

LV071003000013 Fuel Level Sensor