Rearsets & Linkages

Gear Shift Lever (cast alloy 1 hole) Ø15x38mm long (Ducati)

Gear change lever for Ducati 851 Spline suits shafts approximately 14mm OD with 28 teeth.

Gear Shift Lever Alloy Splined Ø13x60mm

Gear change lever for Laverda rearsets. Spline suits shafts approximately 13mm OD with 22 teeth.

Gear Shift Lever Chromed Steel Bend Offset 30mm Ø13x44mm

Gear Shift Lever Jota Ø13x48/56mm (cast alloy 2 holes)

Gear change lever for Laverda rearsets. Spline suits shafts approximately 13mm OD with 22 teeth.

Gear Shift Lever Jota ( steel 1 hole) Ø13x62mm

Gear change lever for Laverda rearsets. Spline suits shafts approximately 13mm OD with 22 teeth.

Gear Shift Lever Jota (cast alloy 1 hole) Ø13mm x 56mm

Gear change lever for Laverda rearsets. Spline suits shafts approximately 13mm OD with 22 teeth.

Gear Shift Lever Splined Ø12mm (Alloy)

Suits Spline with 22 teeth on theLaverda  gearshifter and the crossover shaft also fits Laverda 500 gearshifter

Gear Shift Lever splined Ø14x35mm

Suits Spline with 22 teeth on Laverda  gearshifter 

Left Foot Gear Change SF3 (used)

Genuine Laverda left foot shift to suit Laverda 750 SF1-3. Originally fitted to the SF3 it can be used on earlier models by the welding the Brake Cable Support to the chassis.

LV031001000006 GEAR CHANGE LINK ROD

M10x130 Rearset Footrest Bolt R/H Tarozzi

M10 zinc plated capscrew bolt to secure the Right Side Tarozzi Footpeg to the Laverda Jota Rearset Plate set. The Left side bolt is a different length see Part

M10x140 Rearset Footrest Bolt L/H Tarozzi

M10 zinc plated capscrew bolt to secure the Left Side Tarozzi Footpeg to the Laverda Jota Left Rearset Plate set. The right side bolt is a different length see Part 30215243.1

M6x30 Capscrew CS SS rearsets toe fixing screw

Quickshift Switch (Pull type)

Quick Shift Switch KitAluminium, black anodised, water resistant body with M6 female threads. Kit includes: 1 x Switch, 2 x 50mm M6 studs, 1 x 20mm M6 stud, 2 x Nuts M6, 3 x cable ties.Length of...

Quickshift Switch (Push type)

Quick Shift Switch KitAluminium, black anodised, water resistant body with M6 female threads. Kit includes: 1 x Switch, 2 x 50mm M6 studs, 1 x 20mm M6 stud, 2 x Nuts M6, 3 x cable ties.Length of...

Quickshift Switch Bi-Directional (Push & Pull type)

Quick Shift Switch KitAluminium, black anodised, water resistant body with M6 female threads. Kit includes: 1 x Switch, 2 x 50mm M6 studs, 1 x 20mm M6 stud, 2 x Nuts M6, 3 x cable ties.Length of...

Spacer for gearshift crossover shaft RHS

Alloy spacer fits on the gearshift crossover shaft on the right hand side.

Support Bush 2/SET for Ø12mm Shaft

Bore: Ø12mm Width: 16mm Length: 43mm Mount spacing: 33mm countersunk for M5 capscrews Self-lubricating support bush for Ø12mm gear linkage rod attached to the rear of the crankcases on Laverda...

Tarozzi Clevis Tie Rod Fork Female M6 (RH)Thread for 6mm pin

Tarozzi Clevis and Retaining Clip Tie Rod Fork with female m6 righthand thread and hole for 6mm pin. Tarozzi part: 02-0046 Clevis 02-0047 Retaining Clip